Struct language_e2e_tests::account_universe::AccountCurrent

impl AccountCurrent

pub fn account(&self) -> &Account

Returns the underlying account.

pub fn rotate_key(&mut self, privkey: Ed25519PrivateKey, pubkey: Ed25519PublicKey)

Rotates the key in this account.

pub fn balance(&self) -> u64

Returns the current balance for this account, assuming all transactions seen so far are applied.

pub fn sequence_number(&self) -> u64

Returns the current sequence number for this account, assuming all transactions seen so far are applied.

pub fn sent_events_count(&self) -> u64

Returns the current sent events count for this account, assuming all transactions seen so far are applied.

pub fn received_events_count(&self) -> u64

Returns the current received events count for this account, assuming all transactions seen so far are applied.

pub fn create_account_gas_cost(&self) -> u64

Returns the gas cost of a create-account transaction.

pub fn create_account_low_balance_gas_cost(&self) -> u64

Returns the gas cost of a create-account transaction where the sender has an insufficient balance.

pub fn create_existing_account_gas_cost(&self) -> u64

Returns the gas cost of a create-account transaction where the account exists already.

pub fn peer_to_peer_gas_cost(&self) -> u64

Returns the gas cost of a peer-to-peer transaction.

pub fn peer_to_peer_too_low_gas_cost(&self) -> u64

Returns the gas cost of a peer-to-peer transaction with an insufficient balance.

pub fn peer_to_peer_new_receiver_gas_cost(&self) -> u64

Returns the gas cost of a create-account transaction where the account exists already.

pub fn peer_to_peer_new_receiver_too_low_gas_cost(&self) -> u64

Returns the gas cost of a create-account transaction where the account exists already.

pub fn rotate_key_gas_cost(&self) -> u64

Returns the gas cost of a peer-to-peer transaction with an insufficient balance.

Trait Implementations§

impl Clone for AccountCurrent

fn clone(&self) -> AccountCurrent

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for AccountCurrent

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl PartialEq<AccountCurrent> for AccountCurrent

fn eq(&self, other: &AccountCurrent) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Eq for AccountCurrent

impl StructuralEq for AccountCurrent

impl StructuralPartialEq for AccountCurrent

Auto Trait Implementations§

impl UnwindSafe for AccountCurrent

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> Conv for T

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> Conv for T

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into a target type. Read more

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> Pipe for Twhere T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Pipe for T

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R

Pipes a value into a function that cannot ordinarily be called in suffix position. Read more

impl<T> PipeAsRef for T

fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: AsRef<T>, T: 'a, R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> Rwhere Self: AsMut<T>, T: 'a, R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeBorrow for T

fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Borrow<T>, T: 'a, R: 'a,

Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more

fn pipe_borrow_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: BorrowMut<T>, T: 'a, R: 'a,

Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more

impl<T> PipeDeref for T

fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> Rwhere Self: Deref, R: 'a,

Pipes a dereference into a function that cannot normally be called in suffix position. Read more

fn pipe_deref_mut<'a, R>( &'a mut self, func: impl FnOnce(&'a mut Self::Target) -> R ) -> Rwhere Self: DerefMut, R: 'a,

Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more

impl<T> PipeRef for T

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more

fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Pipes a mutable reference into a function that cannot ordinarily be called in suffix position. Read more

impl<T> Pointable for T

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow, B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut, B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> Tap for T

fn tap<F, R>(self, func: F) -> Selfwhere F: FnOnce(&Self) -> R,

Provides immutable access for inspection. Read more

fn tap_dbg<F, R>(self, func: F) -> Selfwhere F: FnOnce(&Self) -> R,

Calls tap in debug builds, and does nothing in release builds.

fn tap_mut<F, R>(self, func: F) -> Selfwhere F: FnOnce(&mut Self) -> R,

Provides mutable access for modification. Read more

fn tap_mut_dbg<F, R>(self, func: F) -> Selfwhere F: FnOnce(&mut Self) -> R,

Calls tap_mut in debug builds, and does nothing in release builds.

impl<T, U> TapAsRef for Twhere U: ?Sized,

fn tap_ref<F, R>(self, func: F) -> Selfwhere Self: AsRef<T>, F: FnOnce(&T) -> R,

Provides immutable access to the reference for inspection.

fn tap_ref_dbg<F, R>(self, func: F) -> Selfwhere Self: AsRef<T>, F: FnOnce(&T) -> R,

Calls tap_ref in debug builds, and does nothing in release builds.

fn tap_ref_mut<F, R>(self, func: F) -> Selfwhere Self: AsMut<T>, F: FnOnce(&mut T) -> R,

Provides mutable access to the reference for modification.

fn tap_ref_mut_dbg<F, R>(self, func: F) -> Selfwhere Self: AsMut<T>, F: FnOnce(&mut T) -> R,

Calls tap_ref_mut in debug builds, and does nothing in release builds.

impl<T, U> TapBorrow for Twhere U: ?Sized,

fn tap_borrow<F, R>(self, func: F) -> Selfwhere Self: Borrow<T>, F: FnOnce(&T) -> R,

Provides immutable access to the borrow for inspection. Read more

fn tap_borrow_dbg<F, R>(self, func: F) -> Selfwhere Self: Borrow<T>, F: FnOnce(&T) -> R,

Calls tap_borrow in debug builds, and does nothing in release builds.

fn tap_borrow_mut<F, R>(self, func: F) -> Selfwhere Self: BorrowMut<T>, F: FnOnce(&mut T) -> R,

Provides mutable access to the borrow for modification.

fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Selfwhere Self: BorrowMut<T>, F: FnOnce(&mut T) -> R,

Calls tap_borrow_mut in debug builds, and does nothing in release builds.

impl<T> TapDeref for T

fn tap_deref<F, R>(self, func: F) -> Selfwhere Self: Deref, F: FnOnce(&Self::Target) -> R,

Immutably dereferences self for inspection.

fn tap_deref_dbg<F, R>(self, func: F) -> Selfwhere Self: Deref, F: FnOnce(&Self::Target) -> R,

Calls tap_deref in debug builds, and does nothing in release builds.

fn tap_deref_mut<F, R>(self, func: F) -> Selfwhere Self: DerefMut, F: FnOnce(&mut Self::Target) -> R,

Mutably dereferences self for modification.

fn tap_deref_mut_dbg<F, R>(self, func: F) -> Selfwhere Self: DerefMut, F: FnOnce(&mut Self::Target) -> R,

Calls tap_deref_mut in debug builds, and does nothing in release builds.

impl<T> ToOwned for Twhere T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into a target type. Read more

impl<T, U> TryFrom for Twhere U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source§

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more